Skip to content
Courses / Legacy / GPRS and EDGE Air Interface

GPRS and EDGE Air Interface

Learning Time:
6 Hours
Level:
Advanced
Delivery:
On-demand
CPD Credits:
6
Share

Course Details

This course builds on the GSM and GPRS System Engineering course and thereby focuses on the specifics associated with the air interface when supporting packet data transfer. This includes detailed analysis of the logical channels, multiframes and protocols before explaining packet data procedures from a radio perspective. EDGE and Evolved EDGE is also discussed in terms of their associated enhancements and feature sets. Finally, the course evaluates the enhancements that have been made to support IoT applications through the introduction of EC-GSM-IoT.

Graeme Green

Graeme Green

Mpirical Trainer
Graeme has worked at the heart of the mobile telecommunications sector for over 30 years. During this period, he has developed and delivered training to most of the major network vendors and service providers around the world, in addition to speaking at numerous international conferences and attending ETSI and 3GPP technical meetings.
£245
for 6 months access

Individual Course

Get on-demand access to this course including all supporting courseware and learning tools.

Module 1
View

The GPRS Air Interface

Frequency Allocations:

  • GSM900, GSM1800, GSM1900 and GSM850.

Frequency Reuse.

Cell Sectorization.

Air Interface Physical Layer:

  • GMSK.
  • TDMA.
  • Radio, Physical and Logical Channels.

52 Frame Multiframe:

  • PDTCH, PACCH, PTCCH, Idle.

51 Frame Multiframe:

  • FCH, SCH, BCCH, CCCH, RACH.

Burst Structures:

  • Frequency Correction, Synchronization, Access, Normal, Dummy (GMSK and 8PSK).
  • Logical Channels to Burst Format Mapping.
Module 2
View

GPRS Air Interface Protocols

SNDCP (Sub Network Dependent Convergence Protocol):

  • Service Primitives.
  • Service Functions.
  • Frame Structure.

Logical Link Control:

  • Frame Structure.
  • Logical Link Entity.
  • Multiplex Procedure.
  • LLC Operation.

Radio Link Control:

  • TBF (Temporary Block Flow).
  • Downlink RLC Data Block.
  • Uplink RLC Data Block.
  • Downlink RLC Control Block.
  • Uplink RLC Control Block.

Medium Access Control:

  • Downlink MAC Data Block.
  • Uplink MAC Data Block.
  • Downlink MAC Control Block.
  • Uplink MAC Control Block.

Channel Coding:

  • USF Pre Codes.
  • Coding Schemes – CS1 > CS4.
  • Interleaving.
Module 3
View

GPRS Air Interface Procedures

GPRS Mobility Management States:

  • Idle State.
  • Standby State.
  • Ready State.

GPRS Attach:

  • Packet Channel Request:
    • One / Two Phase Access.
    • Contention Resolution.
  • The Attach Process.

Channel Control:

  • Timing Advance:
    • Initial Timing Advance Estimation.
    • Timing Advance Maintenance.
  • Power Control:
    • Open Loop Power Control.
    • Closed Loop Power Control.

Uplink Data Transfer.

Downlink Data Transfer.

Module 4
View

EDGE

EDGE Fundamentals:

  • EDGE Classic.
  • EDGE Compact.

Key Changes to the GPRS Air Interface:

  • Modulation.
  • Modulation Coding Schemes – MCS1 > MCS9.
  • Modulation Coding Scheme Families.

EDGE Enhancements:

  • Packet Handling.
  • RLC / MAC Improvements.
  • Interleaving.
  • Link Adaptation.
  • Incremental Redundancy.
  • EGPRS Capabilities:
    • Device Capabilities.
    • Cell Capabilities.

EGPRS RLC / MAC Formatting:

  • EGPRS Downlink RLC / MAC Header.
  • EGPRS Uplink RLC / MAC Header.
Module 5
View

Evolved EDGE

Evolved EDGE Feature Set.

Latency Reduction:

  • FANR and PAN.
  • Reduced Transmission Time Interval.

Downlink Dual Carrier:

  • Downlink Dual Carrier with Dual Transfer Mode.

Higher Order Modulation:

  • 16QAM, 32QAM.

Increased Symbol Rate.

RLC / MAC Modifications:

  • Downlink EGPRS2-A Modulation and Coding Schemes.
  • Uplink EGPRS2-A Modulation and Coding Schemes.
  • Downlink EGPRS2-B Modulation and Coding Schemes.
  • Uplink EGPRS2-B Modulation and Coding Schemes.
  • RLC / MAC Header Formats.
Module 6
View

EC-GSM-IoT

Fundamentals of EC-GSM-IoT.

EC-GSM-IoT Air Interface:

  • Extended Coverage and Coverage Classes.
  • Logical Channels:
    • EC-CCCH, EC-BCCH, EC-PTCH.
  • Modulation and Coding Schemes.
  • Radio Link Control and Medium Access Control:
    • RLC / MAC Data Blocks.
    • RLC / MAC Control Blocks.
  • Overlaid CDMA.

EC-GSM-IoT Operation:

  • Initial Procedures:
    • C1_EC, C1_GC.
    • Cell Selection.
    • Cell Reselection.
    • Coverage Class Selection.
  • Packet Transfer:
    • Mobile Originated Packet Transfer.
    • Mobile Terminated Packet Transfer.
  • Security Enhancements.

Power Efficient Operation:

  • Power Save Mode.
  • Extended Discontinuous Reception.
£245
for 6 months access

Individual Course

Get on-demand access to this course including all supporting courseware and learning tools.

Available as part of our Package Options

How to get started...

Step 1

Purchase the course with one of the methods below.

Step 2
Log in to the Mpirical learning portal to access your course.
Step 3
Start learning right away with on-demand or get ready for your live session.

Pricing

£245
for 6 months access

Individual Course

Get on-demand access to this course including all supporting courseware and learning tools.

From
£995

Unlimited Access Package

This course is available as part of our Unlimited Access package alongside other learning tools.

Individual Course
£245
Unlimited Access Package
from £995
Access to this video course
Access to reference document
Access to learning platform
Access to NetX
Access to glossary of terms
Access to blogs
Certificate of completion
Earn badges for activities
Access to multiple courses
Access to technology related Telecoms Bytes
Access to all on-demand courses
Access to full Telecoms Bytes catalogue
Access to NetXplore virtual world
Access to NetXpert assessments
Access to NetXlabs

Frequently Asked Questions

Will I receive certification for completing the course?

Yes, all our courses provide a shareable certificate of completion following the test of understanding.

How long do I get access to the course?

On-demand courses are accessible immediately following purchase. Each course will have a different access period ranging from 3-6 months on average. You can continue to access the Mpirical learning platform after your course licence expires; however, you won’t be able to view any course content or learning tools unless you are a paid customer.

What else do I get with a course?

All students benefit from automatic access to our ‘Ask the Trainer’ feature with an on-demand course purchase. You will also get access to our acclaimed network visualisation tool, NetX.*

*NetX is not included with the Mini Telecoms MBA course or partner training.

Can I access the course offline?

Offline access is not currently available. You must use a connected device to access the course and learning tools. However, course pdfs and reference documents are downloadable.

Is there recommended follow-on training?

Yes, we do recommend follow-on training courses within the Mpirical learning platform.

How do I choose between a live course or on-demand course?

Our live courses are generally reserved for teams and enterprises of 10 or more. If you’d like to learn more about purchasing a single course to be delivered at your location or online, please get in touch: enquiries@mpirical.com.